Emotiva A150 Stereo Power Amplifier

Home/Hi-Fi Stereo Equipment/Power Amplifiers/Emotiva A150 Stereo Power Amplifier

Emotiva A150 Stereo Power Amplifier

$ 645

Description

Emotiva A150 Stereo Power Amplifier

Overview

The Emotiva A150 offers lots of performance and simple to set up.  The circuitry in the A150 features a heavy duty linear power supply, great sounding high-current short signal path Class A/B amplifier modules, a trigger input and output plus unbalanced audio inputs.  It also includes audiophile quality fault protection that’s completely transparent in normal operation, yet protects the A-150 and your other equipment from common fault conditions.

 

Specifications

Circuit Topology

The BasX A-150 is a two channel power amplifier. The BasX A-150 combines classical audiophile amplifier architecture – based on a heavy-duty linear power supply, and a carefully designed high current, short signal path, Class A/B output stage, with advanced, microprocessor-controlled monitoring and protection circuitry, to deliver superb sound quality at a truly reasonable price.

Power Output (two channels driven)

75 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms
150 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms

Power Bandwidth (at rated power; 8 Ohm load)

20 Hz to 20 kHz (+ / – 0.07 dB).

Broad Band Frequency Response

5 Hz to 80 kHz (+ / – 1.8 dB).

THD + noise

< 0.02% (A-weighted); at rated power; 1 kHz; 8 Ohms

Signal to Noise Ratio (8 Ohm load)

> 120 dB (A-weighted); ref rated power.
> 100 dB (A-weighted); ref 1 watt.

Minimum Recommended Load Impedance

4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads.

Damping Factor (8 Ohm load)

> 500.

Speaker Output Connections

Audiophile grade, 5-way binding posts.

Power Supply

Linear power supply with heavy duty torodial transformer.

Input Sensitivity (for rated power; 8Ohm load)

1.2 V.

Gain

29 dB.

Input Connections

Unbalanced (RCA); one per channel.

Input Impedance

27 kOhms (unbalanced).

Trigger

Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 120 mA.

Power Requirements

115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).

Front Panel Controls and Indicators

Standby; push button (halo ring changes color to indicate Standby or On).
Status LEDs; one per channel; blue.
Status LEDs change to red to indicate a fault condition.

Rear Panel Controls

AC Power switch; rocker switch (switches AC main power).
Status LEDs switch; disables front panel Status LEDs.

Protection

The BasX A-150 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

Dimensions:

17” wide x 3-1/8” high x 13-1/2” deep (does not include connectors)
21-1/2” wide x 7” high x 21-1/4” deep (boxed).

Weight:

15.5 lbs (net)
21.9 lbs (boxed)