Emotiva BASX A100 Flex Stereo Amplifier

Home/Hi-Fi Stereo Equipment/Emotiva BASX A100 Flex Stereo Amplifier

Emotiva BASX A100 Flex Stereo Amplifier

$ 495

Description

Emotiva BASX A100 Flex Stereo Amplifier

The Emotiva BASX A100 Flex is a great sounding, compact, and very flexible, stereo amplifier.

The A100 can provide audio for a second zone in a larger home theatre installation, or whole house music system.  The Emotiva BASX A100 Flex also includes a great sounding headphone output which offers the ability to drive low-efficiency planar headphones without the need for adaptors and custom cables.

Features

.

  • Best-in-class design and sound quality 
  • 50 watts per-channel @ 8 ohms (80 watts per-channel @ 4 ohms) 
  • Classic style headphone output
  • Direct output option for low-efficiency planar headphones 
  • Flexible power switching 
  • Front panel volume control
  • Heavy duty power supply with massive toroidal transformer
  • Compact size
  • Loop output
  • Full sized five-way binding posts
  • Illuminated Volume knob
  • User selectable AC line voltage
  • Three-year warranty

Specifications

Analog Inputs

  • Unbalanced (RCA); one stereo pair.

Analog Outputs (loop)

  • Unbalanced (RCA); one stereo pair.

Input Sensitivity (for full output)

  • 600 mV (8 ohm load).

Speaker Outputs

  • 5-way binding posts; one stereo set.

Minimum Recommended Load Impedance

  • 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel.)

Power Output

  • 50 watts / channel RMS; 8 Ohms; 20 Hz – 20 kHz; <0.05% THD; both channels driven (FTC).
  • 80 watts / channel RMS; continuous; into 4 ohms.

Headphone Output

  • Front panel jack; full sized 1/4”.
  • Headphone output is derived from the main speaker outputs via high quality 220 Ohm resistors.
  • Optional high-power mode for driving low-efficiency planar headphones.

Headphone output power (direct drive mode):
(requires internal jumper; USE WITH CAUTION)

  • 8 Ohms:  50 watts / channel
  • 33 Ohms:  12 watts / channel
  • 47 Ohms:  8.5 watts / channel
  • 150 Ohms:  2.6 watts / channel
  • 300 Ohms:  1.3 watts / channel
  • 600 Ohms:  0.6 watts / channel

S/N Ratio

  • > 110 dB (A-weighted; ref full output).

Headphone output power (normal mode):

  • 8 Ohms: 60 mW / channel
  • 33 Ohms:  200 mW / channel
  • 47 Ohms:  250 mW / channel
  • 150 Ohms: 430 mW / channel
  • 300 Ohms: 440 mW / channel
  • 600 Ohms: 350 mW / channel

Frequency Response

  • 20 Hz to 20 kHz + / – 0.08 dB at 1 watt (- 1 dB at 80 kHz).

Front Panel Controls and Indicators

  • Volume; analog potentiometer with machined aluminum knob and illuminated status ring.

Rear Panel Controls

  • AC Power switch.
  • Line Voltage (protected slide switch).
  • Trigger Switch (mode) (On, Off, Auto).

Control and Trigger

  • Trigger Input: 5-12 VDC.
  • Auto-sense of audio input signal.
  • Trigger Output: direct hardware feed through of input trigger signal.

Protection

  • The BASX A-100 is protected against all common fault conditions.
  • The status ring will blink amber when a fault is detected.

Power Requirements

  • 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (selectable by rear-panel switch).

Dimensions:

  • (cm) 22 wide x 8 high x 38 deep (includes feet, binding posts, and Volume knob).

Weight:

  • 6 kgs (net)
  • 7kgs (gross)