Parasound 2125 v.2 New Classic 2-Channel Power Amplifier

///Parasound 2125 v.2 New Classic 2-Channel Power Amplifier

Parasound 2125 v.2 New Classic 2-Channel Power Amplifier

$ 1,650

Description

Parasound 2125 v.2 Power Amplifier

The Parasound 2120 V.2 is a THX Ultra II Certified Power Amplifier.  It operates at 150 watts per channel into 8 ohms. It also features a bridging switch for both stereo or mono operation.

Features

  • THX Ultra II certified
  • 150 watts per channel into 8Ω, both channels driven 400 w @ 4
  • Impedance selector switch for 2Ω operation
  • Bridging switch for stereo or mono operation 750 watts mono
  • A/B speaker terminals with individual on/off
  • 18dB/octave high pass filter, switchable 20Hz or 40Hz Fully discrete circuitry with toroid transformer
  • DC Servo and relay protection circuits
  • Automatic on/off by DC trigger with looping outputs
  • Automatic on/off by audio signal with adjustable sensitivity
  • Gold-plated RCA input jacks, loop output jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • Rear mounted gain controls; ground lift switch
  • Standby, channel status, high temperature indicators
  • 2u chassis; RMK-22 rack mount kit available

Specifications

All Channels Driven
150 watts x 2, 8Ω
225 watts x 2, 4Ω
225 watts x 2, 2Ω (Load switch set to 2-3Ω)

Bridged Mono
400 watts x 1, 8Ω
400 watts x 1, 4Ω (Load switch set to 2-3Ω)

Current Capacity
35 amps peak per channel

Frequency Response
20 Hz – 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom – 1.3 dB

Total Harmonic Distortion
0.25% at full rated output
0.015% at average listening levels

IM Distortion – 0.05 %
Transient IM Distortion – Not measurable

S/N Ratio
114 dB at rated output, IHF A-weighted
106 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted

Input Impedance – 33 k Ω

Input Sensitivity 
1 V in for 28.28 V out, THX standard

Inter-Channel Crosstalk
85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz
Damping Factor – Over 150 at 20Hz
12V Trigger Turn On – DC 9 – 12V, 15 mA

Audio Turn On
Quieter: 1 mV
Louder: 6 mV

AC Power Requirement
110 – 120 V / 220 -240 V, 50 – 60 Hz
0.5 watts standby
32 watts Idle (no audio)
550 watts full output

Dimensions
44cm Wide
41cm Deep, with cables connected
11 High with feet, 8.9 panel only (2U)

Net Weight

13 kgs

Reviews

There are no reviews yet.

Be the first to review “Parasound 2125 v.2 New Classic 2-Channel Power Amplifier”

Your email address will not be published. Required fields are marked *